Contact Us
TEL: +86-0571-88334626
E-mail: sales@tacon-china.com.cn
Home > Knowledge > Content
Material Safety Data Sheet (MSDS) of ethyl-m-aminobenzpate CAS:582-33-2
Mar 28, 2018

Material Safety Data Sheet (MSDS)

ethyl-m-aminobenzpate

1. PRODUCT IDENTIFICATION

Product Name: ethyl-m-aminobenzpate

 

CAS Number: 582-33-2

Manufacturer: company name:Hangzhou Tacon Co.,Ltd

              #2-1214 west time business center ,Gongshu District,Hangzhou City, China.

              Tel: +86-571-88334626

Fax: +86-571-88334625

Email:sales@tacon-china.com.cn

 

2. PHYSICAL & CHEMICAL PROPERTIES

Flash Point: 151.2°C

Boiling Point: 1721751.733E3Pa

Vapor Pressure: not determined

Steam pressure: 0.0016mmHg at 25°C

Density: 1.124820℃)

Solubility in water: not determined

PH Value: not determined

Appearance & Odor: colorless oil liquid

 

3. STABILITY & REACTIVITY

Chemical Stability: Stable.

Incompatibility: strong oxidizing agents, acids, acid chlorides, acid anhydrides, chloroformates. May be air-sensitive.

Hazardous Decomposition Products: none known; displays gradual pyrolysis when heated to 150oC or higher

Hazardous Polymerisation: will not occur

 

4. HANDLING & STORAGE

Avoid contact with eyes. Wash thoroughly after handling. As with all chemicals, good industrial hygiene practices should be followed when handling this material. Avoid freezing or excessive heat. Do not handle or store near an open flame, heat or other sources of ignition. Keep the container tightly closed and in a cool, well-ventilated place.

 

5. ACCIDENTAL RELEASE MEASURES

Isolate spill area immediately. Keep unauthorized personnel away. Ventilate closed spaces before entering. Do not touch or walk through spilled material. Prevent entry into waterways, sewers, basements or confined areas. Surface may become slippery after spillage. Use vacuum or broom sweeping and remove to disposal container. If damp, flush with water.

 

6. EXPOSURE CONTROLS & PERSONAL PROTECTION

Respiratory Protection: Where exposure likely exceeds acceptable criteria, use NIOSH/OSHA-approved respiratory equipment.

Protective Clothing: Gloves recommended to prevent skin contact. Safety glasses, goggles, or face shield recommended for eye protection.

Other Protective Measures: Employees must practice good personal hygiene, washing exposed areas of skin several times daily and laundering contaminated clothing before re-use.

 

7. HAZARDOUS IDENTIFICATION

General: Non hazardous and non combustible.

Inhalation: Not a primary route of entry. Mists and vapors may cause dizziness (alcohol)

Eye Contact: May cause slight irritation. Irrigate eye with water. Seek medical attention if symptoms persist.

Skin Contact: Not a skin irritant.

Ingestion: No specific hazard known.

 

8. FIRST AID MEASURES

Eyes: Irrigate eyes with a heavy stream of water for at least 15 to 20 minutes. If irritation persists get medical attention.

Skin: Wash exposed areas of the body with soap and water.

Inhalation: Remove from area of exposure. If breathing is difficult, give oxygen. Seek medical attention if symptoms persist.

Ingestion: If gastrointestinal symptoms develop, consult medical personnel.

 

9. FIRE FIGHTING MEASURES

Flammability Limits: None known

Unusual Fire Hazard: None known

Fire Fighting Procedures: Firefighters should wear full firefighting turn-out gear (full Bunker gear) including NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.

 

10. TOXICOLOGICAL INFORMATION

Acute Toxicity: LD50 >4  g/kg (oral, rats)

Subchronic Toxicity: No pathological findings were observed when 1 g/kg was continually administered to rats for 5 weeks

Chronic Toxicity: No pathological findings were observed when 0.6 g/kg was continually administered to rats for 26 weeks.

Teratogenicity: not teratogenic effects observed in rats

 

11. DISPOSAL CONSIDERATIONS

Storage and disposal must be in accordance with applicable local, state & federal disposal regulations. Characterization and compliance with applicable laws are the responsibility solely of the generator.

 

12. TRANSPORT INFORMATION

General: not regarded as hazardous material

DOT Shipping Name: Refer to corresponding hazard class

ADR/RIC Code: Refer to corresponding hazard class

Sea Transport IMDG Code: Refer to corresponding hazard class

Air Transport IATA: Refer to corresponding hazard class

 

13. DISCLAIMER

This information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any other process. Such information is to be the best of the company s knowledge and believed accurate and reliable as of the date indicated. However, no representation, warranty or guarantee of any kind, express or implied, is made as to its accuracy, reliability or completeness and we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user s responsibility to satisfy himself as to the suitableness & completeness of such information for his own particular use.

 


Previous: MSDS for acetamide CAS No.:60-35-5 provide by Hangzhou Shitai Biotech

Next: 1,2-Dichloropropane CAS No.:78-87-5 two grade provide by supplier Hangzhou Shitai Biotech